Mooring Regulation Highlights

Mooring Regulations


All moorings must be registered. Permits are issued on an annual basis. Permits will be renewed annually provided the permit holder adheres to all of the town's mooring regulations (M.L. Chapter 91:10A). Permits are transferable with prior written permission of the Harbor Masters Department (some restrictions apply). Your mooring permit is being issued for the boat specified on your application. No other boat may occupy your mooring without approval of our office. Mooring locations may be changed by the Harbor Master at any time.

Mooring Specifications


Mooring tackle must adhere to the minimum standards set forth in the town regulations (see full regulations of inspection forms). Some areas in town require short shank anchors only. If winter sticks are used, we highly recommend you do, they must not be placed prior to October 1st, and they must be removed no later than June 15th annually. Mooring tackle must have the town assigned mooring number clearly visible on the tackle at all times. Annual mooring tags must be affixed no later than June 15th. Any tackle found in the water which is unidentified by our department will be removed as illegal hazards to navigation.

Forfeiture of Mooring Space & Permit


Your mooring permit will be canceled or not renewed for any of the following:
  1. Request by owner to cancel the permit. The owner is responsible to remove the tackle from the water
  2. Failure to replace any piece of mooring tackle, within 14 days, which is not in compliance with the tackle specification as set forth in section 5.
  3. Failure to pay the annual mooring renewal fee and demand charge if applicable by the due date listed on the bill.
  4. Failure to pay the assessed boat excise tax, if applicable.
  5. Unauthorized moving of mooring tackle. Tackle locations may not be changed without prior approval of the office.
  6. Rental of a private mooring to any person. Your permit is for your boat only.
  7. Mooring tackle, summer or winter, must be maintained in the assigned locations at all times. Removing the tackle voids your permit.
  8. Your mooring permit shall be revocable for noncompliance with any of the town's mooring regulations.

Mooring Tackle Inspections


All mooring tackle is subject to inspection at any time. Routine inspections are required every 3 years and must be performed by a town approved inspector. All new permits are subject to an out of water inspection prior to issuance of the mooring tackle.

Boating Stickers


All permit holders will be issued a boat sticker. The number on the sticker will match the mooring TAG number, not the mooring number. The mooring sticker must be displayed on the boat assigned to the mooring. Boats without stickers will be considered illegally anchored.

Approved Anchor Types


Mushroom, Dor-Mor, Seaboard Short Shank, Helix. All other types require a special waiver by the Harbor Master in advance of them being set in the water.

Anchor Chain


Galvanized grade 30 proof coil chain or equivalent. Maximum length = 2.5 times the water depth at Mean High Water (MHW). Minimum length = 2 times MHW.

Swivels


If used, they must be one size larger than the chain size. Eye to eye recommended.

Shackles


Shall be the same size as the chain.


Mooring Buoy/Balls


Molded, formed, or fabricated from rubber, plastic, or fiberglass only (steel balls are not allowed). Balls shall be round in shape. Must be capable of sufficient buoyancy to float at least 50% of the ball's mass at MHW. Mimimum diameter is 12 inches wide. It shall be white in color with a (1-inch) horizontal blue stripe. All mooring balls must display the town assigned mooring number in (3-inch) black letters/numbers. Mooring balls not conforming to the town regulations will be removed as hazards to navigation.

Winter Sticks/Spars


Must be in a vertical position above the water line at least (12 inches) at MHW. Winter stick markings and color are the same as the mooring balls. Allowed October 1st to June 15th only. Any other time they are considered hazards to navigation and will be removed by our department.

Special Tackle Areas


Short shank, Dor-Mor, and seaboard anchors are required in the following areas: (1) Green Pond North of the Menauhant Bridge, (2) Green Pond South, certain southwesterly moorings, (3) Great Pond Maravista in the Coonamessett/Dexters River (North of 259 Shorewood Drive, north end of the Great Harbors Association). Eel River West-ALL.
* Top chain length = one times the depth at Mean High Water. Shaft collar shall consist of a Cast Iron Ballast Ball affixed to the anchor shaft or an equivalent weight of steamer shain (10 pound per link minimum required).
Boat Length
Mushroom Dor-Mor Pounds
Bottom Chain
Top Chain*
Pennant
Up to 13 feet
100 pounds
70 pounds
3/8 inch
3/8 inch
1/2 inch
13 - 19 feet
150 pounds
135 pounds
1/2 inch
3/8 inch
1/2 inch
19 - 25 feet
200 pounds
200 pounds
1/2 inch
1/2 inch
5/8 inch
25 - 29 feet
300 pounds
(75-pound shaft)
375 pounds
5/8 inch
1/2 inch
5/8 inch
29 - 39 feet
500 pounds
(75-pound shaft)
500 pounds
3/4 inch
5/8 inch
Two at 5/8 inch or 3/4 inch
39 feet and over
700 - 1,000 pounds (135-pound shaft)
1,000 pounds
3/4 inch
5/8 inch
1 inch